Building and Timber Supplies
DUE TO PRICE FLUCTUATIONS IN THE MARKET WE ARE UNABLE TO LIst PRICES ON PRODUCTS. PLEASE GIVE US A CALL AND WE WILL PROVIDE YOU WITH A UPTO DATE QUOTATION AND DELIVERY TIME. THANK YOU!
Aerated Blocks
Toplite Standard is extremely versatile, and can be used where just one block type is required for use in external and separating walls in houses and apartments, as well as other building types.
Enquire Now
440mm x 215mm x 100mm Thermalite Hi-Strength Block 7N
Hi-Strength 7 has been specifically designed for applications such as flats of three storeys and above, offices, supermarkets and retail parks, where loading conditions require a 7.3N/mm2 building blo
Enquire Now
440mm x 215mm x 140mm Solid Lightweight Block 7N
At MKM we have years of experience sourcing the right block for the right project. We locate the best products from the best local suppliers - as a result products will vary depending on your location
Enquire Now
440mm x 215mm x 140mm Hollow Concrete Block 7N
At MKM we have years of experience sourcing the right block for the right project. We locate the best products from the best local suppliers - as a result products will vary depending on your location
Enquire Now
Timloc 2075 Horizontal Cavity Tray 460mm
The main cavity tray component, the horizontal tray. Sections join together by means of a lapped joint, sealed with factory applied butyl mastic tape, to form the main cavity run. Water is gathered by
Enquire Now
Timloc 1201 Air Brick Black
For use: in conjunction with the telescopic underfloor ventilator for providing ventilation below suspended ground floors and with cavity sleeves for ventilation through external walls to the building
Enquire Now
65mm Class A Solid Blue Engineer Brick
This product is normally supplied in packs of 400, split packs may be available. Please check with your local branch before ordering. At MKM we have years of experience sourcing the right brick for t
Enquire Now
65mm Class B Perforated Red Engineering Brick
This product is normally supplied in packs of 504, split packs may be available. Please check with your local branch before ordering. Class B engineering bricks suitable for use where appearance is n
Enquire Now
Galvanised Joist Hanger Speedy ST Timber To Timber 88mm
BS6178:Part 1:1990(Min 2.8N/mm²) For supporting timber joists and structural composite timber from masonry walls. A non-welded construction to BS6178. Increased safe working loads, higher side flange
Enquire Now
Galvanised Joist Hanger Speedy ST Timber To Timber 100mm
- 100mm standard leg timber to timber joist hangers - Designed to provide a quick and safe method of joist trimming for light and medium duty joints - Standard leg hangers are designed for a maximum j
Enquire Now
Truss Clip 38mm
- Available in 38mm widths - Eliminates the disadvantages of skew nailing trussed rafters to timber wall plates or split rafters - Use with BAT sherardised nails - Manufactured from 0.9mm thick pre
Enquire Now
Galvanised Steel Bat-U-Nail/Truss Plate 76mm x 100mm
- Available in 76mm x 100mm - Plate system which enables timber structures to be made on site or in the workshop - Fix on both sides and use with BAT sherardised nails - Manufactured from 0.9mm thi
Enquire Now